The Dreambox 500s  is a satellite receiver designed to play free-to-air programming produced in an MPEG-2 or MPEG-1 video format. The receiver does have a USB port, which allows you to update the installed firmware whenever there is a newly released upgrade for the hardware. Adding a USB device to the DreamBox 500S only takes a minute or two to complete.

Things You'll Need

• USB flash drive

• 1

Power down the DreamBox 500S. The hardware must be turned off before adding a USB device.

• 2

Plug the USB hardware into the USB port of the DreamBox 500S, located on the back of the receiver.

• 3

Power on the receiver and it automatically detects the connected USB device, uploading any upgrades or firmware saved on the hardware.

• 4

Disconnect the USB flash drive from the receiver once a prompt appears on the screen, stating the upload has

finished.

More information:

http://www.myclickshop.co.uk/dreambox-500s-dm500-satellite-receiver-with-scart-rs232-interface.html

Posted by: espowqyl at 02:32 AM | No Comments | Add Comment
Post contains 158 words, total size 2 kb.